Set up in 1999, Deland Car Accessories Co., Ltd. is a professional China 5v regulator manufacturer and designer. It has years of OES and OEM 5 volt regulator, 5v voltage regulator production experiences and passed ISO9000 and the TUV certification of ISO/TS16949 quality system. Therefore, we can better fulfill customers' specifications and satisfy their changing needs, such as Ford, Opel, Benz, BMW, Nissan, Toyota, Mitsubishi, Mazda, Isuzu, Hyundai, Kia and Truck series.

Vout: +5 V * Vin: +7 V min, +35 V max * Iout: 1 A * Case style: TO-220
The bypass thyristor Vabs is situated in the excitation circuit between one phase and the anode-side output of the rectifier bridge in series with the bypass resistor Rabs (Fig. 4). The bypass circuit, parallel to excitation winding RE, is switched on in the time ranges at which valve V5 is conductive. Part of the excitation current can therefore be made to bypass the excitation winding. This takes place within every period for a fraction of that period (control angle). The excitation current is reduced in accordance with the control angle and the resistance ratio Rabs/ RE. The programmer is the element which makes it possible to load the program in the PIC FLASH memory. It is connected to the computer by series or parallel connections.
It can either be done by yourself or buy it.The model presented here was bought ready made at 390FF, which is expensive compared to the home made systems, but you don't need any equipment to make it. You will find diagrams in the links at the top of the page. Note that it should also be powered with 12V.

The bypass thyristor Vabs is situated in the excitation circuit between one phase and the anode-side output of the rectifier bridge in series with the bypass resistor Rabs (Fig. 4). The bypass circuit, parallel to excitation winding RE, is switched on in the time ranges at which valve V5 is conductive. Part of the excitation current can therefore be made to bypass the excitation winding. This takes place within every period for a fraction of that period (control angle). The excitation current is reduced in accordance with the control angle and the resistance ratio Rabs/ RE. The programmer is the element which makes it possible to load the program in the PIC FLASH memory. It is connected to the computer by series or parallel connections.
It can either be done by yourself or buy it.The model presented here was bought ready made at 390FF, which is expensive compared to the home made systems, but you don't need any equipment to make it. You will find diagrams in the links at the top of the page. Note that it should also be powered with 12V.