Set up in 1999, Deland Car Accessories Co., Ltd. is a professional China 7812 regulator manufacturer and designer. It has years of OES and OEM 7812 regulators production experiences and passed ISO9000 and the TUV certification of ISO/TS16949 quality system. Therefore, we can better fulfill customers' specifications and satisfy their changing needs, such as Ford, Opel, Benz, BMW, Nissan, Toyota, Mitsubishi, Mazda, Isuzu, Hyundai, Kia and Truck series.

* Vout: +12 V * Vin: +14.8 V min, +35 V max * Iout: 1 A * Case style: TO-220
When the input voltage is higher than 6v, this will regulate the output to 6v. When the input voltage is less than 6v, the regulator is bypassed. Weight is only 0.4 oz. Current is 10 amp cont. 20 amp peak at 7.2vdc in. 8.4vdc max input. Generator regulator SSMe is dedicated for 6V generators 30-60Watts with negativ "-" on earth instalation, especially for generators equiped with electro-mechanical regulator BOSCH typ SSM and similar.SSME fit for putting under original cover dimensions (40x45x22) and holes arrangement make repleacement of regulator easy. regulator included two systems -Voltage regulator and output current controller adjusted for 30 ,45 ,50 or 60 Watts. However regulator is preadjusted in production , it's able to adjust when required. Voltage regulator. Fits all John Deere, Farmall, and Allis Chalmers tractors with a delco charging system and a 6V positive ground voltage regulator that mounts on the generator.

Type 7812, +12 voltage regulator - case style: TO-220. Vero Board at least 15x15. 1x 5 Volt positive regulator and mounting kit. 1x 12 Volt positive regulator and mounting kit. 4x 0.1 microFarad capacitors (50 volts or greater). 2x 100 microFarad capacitors (16 volts or greater). 5x Vero pins. Tinned copper wire. Soldering iron & Solder. Wire cutters & pliers. Supplied without heat sink. You just need to add a suitable transformer (see User Manual for details). Regulates battery voltage to 6V. Also offers a failsafe switch, which intern if the switch fails, the regulator remains on. You can finish your race and not have a runaway. SSME fit for putting under original cover dimensions (40x45x22) and holes arrangement make repleacement of regulator easy. regulator included two systems -Voltage regulator and output current controller adjusted for 30 ,45 ,50 or 60 Watts. However regulator is preadjusted in production , it's able to adjust when required. This regulator employs internal current limiting, thermal shutdown, and safe area compensation. With adequate heat-sinking it can deliver output currents in excess of 1.0 ampere.