Set up in 1999, Deland Car Accessories Co., Ltd. is a professional China internal regulator manufacturer and designer. It has years of OES and OEM internal regulators production experiences and passed ISO9000 and the TUV certification of ISO/TS16949 quality system. Therefore, we can better fulfill customers' specifications and satisfy their changing needs, such as Ford, Opel, Benz, BMW, Nissan, Toyota, Mitsubishi, Mazda, Isuzu, Hyundai, Kia and Truck series.

RE60 Voltage Regulator 12V Common
Voltage Regulator 12 Volt suits Australian vehicles fitted with Bosch alternator with internal regulator (1988-94).
Replaces Bosch: 9 190 067 016 and 9 190 067 019. Bosch 12V 60A alternators. Bosch 12V 60A alternators. With single groove pulley, standard performance fan and removeable internal regulator. A minimum load of 2 Watt is needed to excite these alternators. If external regulation is required , brush holder 101020 should be fitted. Perfectly suited to work with the NEXT STEP regulator 105001. Pivot on dual mounting legs (saddle type) with adjustable bush for mount spacings of 56 to 69mm (100001) and 77 to 88mm (100002 - suited to Yanmar). The 12-SI Alternator has the same outside dimensions as the10-SI (shown below) and will fit in it's place without modification. The 12-SI has several design improvements over the 10-SI that make it the better choice between the two. Larger Rectifier to handle more Amps. Wider Stator and Rotor for improved. Magnetism for Better Low End Output. Plus the increase in mass helps with Heat. Larger Cooling Holes at back for Better Cooling of Rectifier, Stator and other internal components. High Volume Axial Turbo fan for Greater Air Flow through the Alternator

Voltage Regulator 12 Volt suits Australian vehicles fitted with Bosch alternator with internal regulator (1988-94).
Replaces Bosch: 9 190 067 016 and 9 190 067 019. Bosch 12V 60A alternators. Bosch 12V 60A alternators. With single groove pulley, standard performance fan and removeable internal regulator. A minimum load of 2 Watt is needed to excite these alternators. If external regulation is required , brush holder 101020 should be fitted. Perfectly suited to work with the NEXT STEP regulator 105001. Pivot on dual mounting legs (saddle type) with adjustable bush for mount spacings of 56 to 69mm (100001) and 77 to 88mm (100002 - suited to Yanmar). The 12-SI Alternator has the same outside dimensions as the10-SI (shown below) and will fit in it's place without modification. The 12-SI has several design improvements over the 10-SI that make it the better choice between the two. Larger Rectifier to handle more Amps. Wider Stator and Rotor for improved. Magnetism for Better Low End Output. Plus the increase in mass helps with Heat. Larger Cooling Holes at back for Better Cooling of Rectifier, Stator and other internal components. High Volume Axial Turbo fan for Greater Air Flow through the Alternator